羟基硅酸盐润滑油添加剂对45#钢/球墨铸铁摩擦副摩擦磨损性能的影响

采用MM-200型摩塔磨损试验机考察了45^#钢／球墨铸铁摩擦副在650SN基础油和含羟基硅酸盐矿物复合微粉的650SN基础油(KF-1)润滑下的摩擦磨损性能，结果表明：在650SN基础油润滑下的摩擦系数和磨损率随试验时间增加变化较小；而在KF-1润滑下，试验初期的摩擦系数和磨损率比基础油润滑下的稍大，随着试验时间的延长，相应的摩擦系数和磨损率同基础油润滑下的相比明显降低．磨损表面显微硬度测试结果表明，在KF-1润滑下45^#钢磨损表面形成了多孔摩擦改性层，硬度明显提高，因而摩擦磨损性能显著改善．     

可聚合添加剂和极压添加剂对矿物油极压抗磨和抗疲劳性能的影响

选用重极压齿轮油和二聚酸 /司本 - 80添加剂制备了多种不同配比的油样 ,进行了疲劳和胶合试验 ,同时分析了磨损表面形貌和抗磨机理 .结果表明 :聚合添加剂的耐疲劳性能较好 ,其与极压添加剂经合理复配可以更好地提高油样的耐疲劳及抗胶合综合性能 .这是两类添加剂协同作用的结果     

大型公共建筑工程质量保险纯费率厘定研究——基于GLM及GAM的实证比较分析

为准确地厘定大型公共建筑工程质量的保险纯费率，通过文献分析及调研，对影响大型公共建筑工程质量的因素进行了研究，提炼出11项保险费率因子。以46栋竣工于1993—2016年的大型公共建筑为工程数据集，在频率-强度法基础上，基于Poisson、Negative Binomial、Gamma、Inverse Gauss等分布的假设，利用广义线性模型及广义可加模型建立了8个工程质量保险纯费率厘定模型，通过比较选择最优模型，并对模型进行了验证。结果表明，所建模型可用于大型公共建筑工程质量保险纯费率厘定。     

紫外熔石英元件高精度低缺陷控形控性制造技术研究进展

传统的紫外熔石英元件加工方法本身会引入各类制造缺陷,需要后期加工来消除前期加工带来的缺陷,限制了熔石英元件的加工质量和加工效率。针对这些问题,课题组提出了采用磁流变、离子束、保形光顺和流体动压抛光等可控柔体加工技术提升熔石英元件的加工效果,并开展了相关研究。主要介绍了课题组在关键技术上取得的重要进展,包括亚纳米精度表面控形制造技术、纳米精度本征表面控性生成方法、熔石英元件高精度低缺陷组合工艺与设备等一系列关键技术。通过探讨关键技术及其发展现状,为未来紫外熔石英元件高精度低缺陷制造技术的发展提供参考。     

区域小微企业群体大规模客户化制造系统模块化组建研究

为提升组建效率,降低组建难度与成本,在分析区域小微企业及其群体特点的基础上,提出由小微企业构建产品制造模块,通过模块的组合,形成大规模客户化制造系统的模块化组建方法.同时,结合对产品制造模块及其构建方式,以及模块选择主要影响因素的分析,研究了基于模块选择系数的制造模块选择策略,为制造系统的模块化组建提供了必要条件.     

A new mathematical model towards the integration of cell formation with operator assignment and inter-cell layout problems in a dynamic environment

This paper proposes a new mathematical model to solve the cell formation, operator assignment and inter-cell layout problems, simultaneously. The objectives of proposed model are minimization of inter–intra cell part trips, machine relocation cost and operator related issues. Since the objective function of the proposed model consists of none commensurable statements, the preferred solution is obtained by the LP-metric approach. In order to validate the proposed model, some numerical examples are generated randomly and solved by branch and bound technique. Moreover; a real case study is illustrated in order to verify its applicability in an automobile producer company. Moreover the sensitivity analysis of proposed model shows that considering the operator assignment problem has significant impact on the overall system efficiency.     

Specific interaction between fluorine atoms and thiol groups accounting for higher domain purity and photostability in narrowband BHJ systems

In order to explore the role of fluorine atoms on photostability as well as morphology control of active layer in the presence of 1,4‐butanedithiol (BT), the four polymers with or without fluorine atoms in the backbones including polythieno[3,4‐b]thiophene/benzodithiophene, poly[(4,8‐bis‐(2‐ethylhexyloxy)‐benzo(1,2‐b:4,5‐b9)dithiophene)‐2,6‐diyl‐alt‐(4‐(2‐ethylhexanoyl)‐thieno[3,4‐b]thiophene‐)‐2‐6‐diyl)], poly[4,8‐bis(5‐(2‐ethylhexyl)thiophen‐2‐yl)benzo[1,2‐b;4,5‐b′]dithiophene‐2,6‐diyl‐alt‐(4‐(2‐ethylhexyl)‐3‐fluorothieno[3,4‐b]thiophene‐)‐2‐carboxylate‐2‐6‐diyl)], and poly[4,8‐bis‐(2‐ethyl‐hexyl‐thiophene‐5‐yl)‐benzo[1,2‐b:4,5‐b0]dithiophene‐2,6‐diyl]‐alt‐[2‐(20‐ethyl‐hexanoyl)‐thieno [3,4‐b]thiophen‐4,6‐diyl] were selected for comparison. It is found that the specimens containing fluorine atoms in polymer backbones showed of higher stability after illumination for 1 h in the presence of BT additive, contributing to the higher domain purity. The specific interaction between fluorine atoms and thiol groups was demonstrated by the appearance of novel absorption peak at 2663.1 cm^?1, in addition to the broadening of peak at 2556.2 cm^?1 ascribing to S? H stretching vibration as confirmed by Fourier transform infrared (FTIR) spectroscopy. The finding may guide the accurate use of thiols as effective solvent additive in morphology and stability optimization. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2019 , 57, 941–951     

High‐efficiency polymer solar cells based on phenylenevinylene copolymer with BF2‐azopyrrole complex and CN‐PC70BM with solvent additive

Power conversion efficiency (PCE) of phenylenevinylene‐based copolymer with BF₂ azopyrrole complex (PB)/modified PC₇₀BM, that is, CN‐PC₇₀BM bulk heterojunction solar cells improves from 2.16 to 4.90% using a processing additive and drying condition. The results demonstrate that a processing additive and drying condition provides an effective means to control both the surface roughness and finer interpenetrating networks to enhance the exciton dissociation into free charge carriers, charge transportation, and collection. Taking into the account of simple device fabrication process without thermal annealing, the PCE of the polymer solar cell can further improved by chloronapthalene (CN) additive under the fast drying condition. The average carrier lifetimes extracted from the impedance spectra and found to correlate with measured PCEs. At short circuit conditions and illumination, the average charge carrier lifetime was found vary from 16.8 to 32 μs with power conversion efficiencies ranging from 3.0 to 4.9%. © 2012 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2012     

A new design of the elimination and choice translating reality method for multi-criteria group decision-making in an intuitionistic fuzzy environment

The purpose of this paper is to design a new extension of the ELECTRE, known as the elimination and choice translating reality method, for multi-criteria group decision-making problems based on intuitionistic fuzzy sets. This method is widely utilized when a set of alternatives should be identified and evaluated with respect to a set of conflicting criteria by reflecting decision makers’ (DMs’) preferences. However, handling the exact data and numerical measure is difficult to be precisely focused because the DMs’ judgments are often vague in real-life decision problems and applications. A more realistic and practical approach can be to use linguistic variables expressed in intuitionistic fuzzy numbers instead of numerical data to model DMs’ judgments and to describe the inputs in the ELECTRE method. The proposed intuitionsitic fuzzy ELECTRE utilizes the truth-membership function and non-truth-membership function to indicate the degrees of satisfiability and non-satisfiability of each alternative with respect to each criterion and the relative importance of each criterion, respectively. Then, a new discordance intuitionistic index is introduced, which is extended from the concept of the fuzzy distance measure. Outranking relations are defined by pairwise comparisons and a decision graph is depicted to determine which alternative is preferable, incomparable or indifferent in the intuitionistic fuzzy environment. Finally, a comprehensive sensitivity analysis is employed to further study regarding the impact of threshold values on the final evaluation, and a comparative analysis is demonstrated with an application example in flexible manufacturing systems between the proposed ELECTRE method and the existing intuitionistic fuzzy technique for order preference by similarity to ideal solution (IF-TOPSIS) method.     

Influence of pyridine-based ligands on photostability of MAPbI3 thin films

1. Download : Download high-res image (102KB)
2. Download : Download full-size image